|
 Primer
An
urethane base
moisture curing
adgesive primer
which shows
the strong tensile
strength and
elasticity.
SSAP
Sheet
A
SBS(Styene-Butadiene-Styene)
modified rubber-asphalt
sheet, hot-laminated
with polyester
non-woven
fiber, with
the weight 120g/㎡
minimum, in
upper-side,
and find sand
(film, or
paper)
in down-side.
The sheet shall
conform to KS
F 4917.
Gross
thickness 2.3㎜
minimum. Size
1m x 15m roll.
HIT
Tape
A
fabric tape
with coating
of waterproofing
material at
the center of
the tape, to
be used
to
protect the
waterproofing
membrane on
moving crack
caused by vibration,
or thermal shock
etc.
Reinforcing
Tape
High
quality acryl
coated glass
fiber mat to
be used for
reinforcing
at the sheet
joints and
cormer
area of structures
Poly-urethane
This
material shall
conform to KS
F 3211,"Coating
Material for
Roof Waterproofing"
Class
1 for exposed
type.
Top
Coat
Aliphatic
urethane or
acrylic urethane,
ultra-violet
resisting color
pigment included.
Sand
The
layer of sand
is used to protect
the waterproofing
membrane from
degradation
due to
weather,
heat, and ultraviolet,
etc.
as
well as resisting
of impact and
slippery, and
also cause an
aesthetic surfaces.
Usage for Standard
SSAP Waterproofing
System
| ltem |
For Application |
Use |
| Primer |
JOINT on base |
0.2 kg/㎡ |
| SSAP Sheet |
Concrete substrates |
1.05 ㎡/㎡ |
| Polyurethane |
JOINT and on SSAP sheet (exposed) |
2.6 kg/㎡ |
| HIT Tape |
Corner and moving crack |
1.2L (size: 0.1m x 50m) |
| Filber-Glass |
Floor |
JOINT and SSAP sheet |
1.2L (size: 0.1m x 100m) |
| Wall |
Corner and edge |
1.2L (size: 0.14m x 100m) |
| Top Coat |
Finish |
0.5 kg/㎡ |
| White Sand |
On the urethane coating |
1.5~2.0 kg/㎡ |
|
.png){kind=small}
Materials
for SSAP Waterproof System
